BIQU 1.75mm PLA/ABS Filament for 3D printer

• Good toughness high strength, high stiffness ;
• No block nozzle, good stick hot bed, a smooth PLA used
• Can be processed at 185 degrees
• Low shrinkage, thermoforming dimensional stability
• Accurate diameter: 3.0/1.75mm, variations + /-0.03mm, roundness +/-0.02mm;

Specification:

1, Material: Raw materials are all imported from the United State, there’s absolutely no defective, recyled raw materials or in it.

2., Weight: The net weight of Consumables is 1kg, component fully.

3, Appearance,: Pure color, wire diameter tolerance of 0.03.

4, Repeated Teat Results:Compared with ordinary low consumables on the market, this material toughness stength, higther hardness, printing support artfifacts more easily removed.

5, Suiable temperature: This product can adapt to 195-220 degrees, but the low temperature will impact extrusion, high temperature influence cooling, so it is recommended that the temperature at 195-220℃ is the best. The above information is for reference only, the room temperature, machine structure and performance may have differences in various cities, so the best temperature is dissimailar with the suggested one, it’s better to make choices according to actual condition. Setting print temperature just 10℃ could solve the low-viscosity problem. If there is a low viscosity printing, relative to the temperature of print ten degrees is ok.

Color:

PLA1.75 White
    PLA1.75 Black
    PLA1.75 Red
    PLA1.75 Orange
    PLA1.75 Yellow
    PLA1.75 Green
    PLA1.75 Blue
    PLA1.75 Cyan
    PLA1.75 Transparent
    PLA1.75 Dark Grey

  PLA1.75 Light Grey
    PLA1.75 Purple
    PLA1.75 Pink
    PLA1.75 Skin Color
    PLA1.75 Brown